[Healeys] Dash insulation

john spaur jmsdarch at sbcglobal.net
Sat Aug 10 15:03:58 MDT 2013


Michael,

If they are like the ones in a BT7 you can make them from the 15# 
(fifteen pound) roofing felt. It helps if you saved the old ones. The 
link below explains the difference between Tar paper and roofing felt 
and mentions Grade D building paper as being similar to Tar paper. 
However, Grade D building paper has more of a brown paper bag finish 
on one side if I recall correctly.

http://en.wikipedia.org/wiki/Tar_paper

John

At 04:30 PM 8/10/2013 -0400, you wrote:
>A thick tar paper insulation material was installed on the back of the
>firewall above the heater duct. The material was a very thick tar paper. There
>were 2 pieces a right and a left.
>Has anyone any idea if these are available or failing that where to get the
>material.
>I'm not looking forward to trying to laminate several layers of construction
>paper.
>
>Michael S
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net


More information about the Healeys mailing list