[Healeys] turn signal issue

[Alan Seigrist]

Disconnect and reconnect all wires to relay.  Also do the same with bullet
connectors in the harness to the affected areas.  Then take the rawhide
mallot and tap/whack the relay box a few times, be careful not to dent it.
 Then try again.

On Thursday, August 1, 2013, john spaur wrote:

> I am trouble shooting my turn signals. This is the situation:
>
> The horns work.
> Brake lights work.
> The running lights operate when switched on.
> Manually pressing the relay contacts operates the right front and right
> rear signals simultaneously.
> Only the left rear turn signal operates when the relay is manually
> operated.
>
> The trafficator will operate the right rear turn signal but not the left
> rear, left front or right front.
>
> Running a jumper wire from terminal A3 to the following relay terminals
> results in:
>
> Terminal 3 - right rear and left rear light up simultaneously.
> Terminal 7 - right rear and left rear light up simultaneously.
> Terminal 2 - left front lights up.
> Terminal 6 - right front lights up.
>
> What are the wiring problems?
>
> Do I have a bad relay and a mis-wired trafficator?
>
> Any help would be very much appreciated.
>
> Thank you,