[Healeys] Maximum 2.6 Bore

[Austin Healey]

Hi Michael,

Although again: I dont have a 100/6 engine at hand to set a clear idea, but
I would say that offset boring can make _some_ improvement. If You look at
the siamese bores (1-2, 3-4, 5-6), if You do one slightly forward and out,
and the other backwards and out, it can leave some extra wall between the
two bores. Maybe just enough to save the day. Or not... if You are unlucky
then You loose whatever You do. Sometimes this is the fact.

Gergo


PS: with Minis it is a great route to go on if a 1275 is bored over 1340.