[Healeys] BJ8 extra wires

[Michael Salter]

My guess would be that there is some confusion over the harness that has
been used because earlier cars e.g. BJ7 had the same horns as a BJ8 but
they were mounted one each side of the engine compartment.

Michael S


On Sat, Apr 13, 2013 at 11:55 AM, Richard Kahn <tahoehealey at hotmail.com>wrote:

> There are three purple wires (one with black stripe )hanging from the wire
> harness (not original, PO installed as they are not cloth wrapped) forward
> of
> the front carb. They each have flat female connectors. I've paid no
> attention
> to them for the last 11 years because everything works. I cannot find them
> on
> any wiring diagram. They only became important last week when I got a spark
> when cleaning the engine compartment. I shrink rapped them to prevent
> shorts
> but now I wounder what they were for. They match the wire to the the horns
> but
> are on the wrong side of the bay. They could fit to the flasher relay
> judging
> by the length of the wires. Any Ideas what they might be for?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>


-- 
Michael Salter