[Healeys] Blanking sleeve question

[Bob Spidell]

The sleeve is 3/8" high, just slightly more than the area above the bypass port.  When the thermo opens, the sleeve 
drops about a quarter inch IIRC, which would block most of the bypass port.

Bob


On 4/1/2013 1:33 PM, Per Schoerner wrote:
> Bob
> The thermostat you have does it move downwards when it opens? If, so then it works the other way around than was 
> intended.
> I checked that Stewart web site, and it certainly looks like they open downwards.
> I have a photo of the bypass hole somewhere on my facebook. Check there, the bypass hole should be closed when the 
> engine is warm and the thermostat open.
> Hey, I'll share that picture in your facebook, that's easier.
>
> Per
>
> Per
>
>
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************