[Healeys] Blanking sleeve question

Bob Spidell bspidell at comcast.net
Mon Apr 1 12:54:11 MDT 2013


Nope. It's a sleeve about 5/8" wide with three tangs that were soldered to the bottom of the Robertshaw thermostat, 
which moves down when it opens.



On 4/1/2013 10:54 AM, Steve Gerow wrote:
>
> Bob,
>
> Are you using the Moss blanking sleeve for this?
>
> I bought one of their fail-open t-stats (its a Motorad) and was wondering if I can just insert the blanking sleeve 
> and put the t-stat in on top of it  not sure what Id solder to what.
>
> --
>
> *Steve Gerow*
>
> >>>
>
> Date: Mon, 01 Apr 2013 09:29:46 -0700
> From: Bob Spidell <bspidell at comcast.net <https://mbox.hoster902.com/compose.php?to=bspidell@comcast.net>>
> To: healeys at autox.team.net <https://mbox.hoster902.com/compose.php?to=healeys@autox.team.net>
> Subject: Re: [Healeys] BJ8 radiator cap issue
> Message-ID: <5159B5FA.5070601 at comcast.net <https://mbox.hoster902.com/compose.php?to=5159B5FA.5070601@comcast.net>>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> The 160deg sleeved thermostat I got was a standard Stewart/Robertshaw thermostat with a sleeve soldered on. I
> desoldered the sleeve and soldered it to a 180deg Stewart thermostat.
>
> http://www.stewartcomponents.com/tech_tips/Tech_Tips_3.htm
>
> Bob
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************


More information about the Healeys mailing list