[Healeys] Rear Shroud Rivets

[Bob Yule]

    We have these rivets in stock.  However, we use rivets that are much 
longer than needed, and after clamping up the flanges, we cut them to suit. 
They are easily cut with a pair of sidecutters.  I think you will find that 
1/4" long rivets are not long enough to work with.
Cheers.......Bob
Check out our web site www.autofarm.net
----- Original Message ----- 
From: "Michael Salter" <michaelsalter at gmail.com>
To: <healeys at autox.team.net>
Sent: Friday, September 14, 2012 10:07 AM
Subject: [Healeys] Rear Shroud Rivets


> I've been trying to find the original flat head aluminum rivets used to
> attach the rear shroud.
> I've purchased some that are 1/4" long but I think that is too long for
> this application.
> Does anyone have any idea what the original length of these rivets was?
>
> Thanks,
>
> -- 
> Michael Salter
>
>                         *I have BJ8 water pump kits!!*
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/autofarm@cyg.net