[Healeys] Rear Shroud Rivets

[jerry adams]

Michael,
 
If I am not mistaken David Nock has these.  Any way if you have
rivets 1/4" long you can grind about 1/16" off and they should work.  What you
have is an aluminum aircraft rivet, yes?
 
Jerry Adams
BN2

From: Michael
Salter <michaelsalter at gmail.com>
To: healeys at autox.team.net 
Sent: Friday,
September 14, 2012 9:07 AM
Subject: [Healeys] Rear Shroud Rivets

I've been
trying to find the original flat head aluminum rivets used to
attach the rear
shroud.
I've purchased some that are 1/4" long but I think that is too long
for
this application.
Does anyone have any idea what the original length of
these rivets was?

Thanks,

-- 
Michael Salter

                        *I
have BJ8 water pump kits!!*
Suggested annual donation 
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cjerryadams@yahoo.com