[Healeys] Overdrive problem

[Dick Matson]

I have a new unused OD Pressure Gauge for sale.  Fittings are included.  $40
or offer plus shipping.  They were offered on the list some 8-10 years ago.  I
don't know if they are still available or not.

I also have a number of other items for sale now.  All are in good shape:

Original BMC Series Bj7 and Bj8 Body Parts Manual & Service Parts Manual /
$150
Original 4-ring binder BMC 100-6 & 3000 Workshop Manual / $135
Original SU Carburetter & Fuel Pump Workshop Manual - AUC9613A - thru 2.6 L  /
$75
MG Mitten car cover / $175
NIB Water Pump / $100
Pair of headlight mesh/screens / offer

Dick Matson / WA State
Off-List to MedLabInc at msn.com<mailto:MedLabInc at msn.com>



----- Original Message -----
From: Austin Healey<mailto:pajtamuvek at gmail.com>
To: Michael Salter<mailto:michaelsalter at gmail.com>
Cc: Healeys at autox.team.net<mailto:Healeys at autox.team.net>
Sent: Saturday, October 13, 2012 11:58 AM
Subject: Re: [Healeys] Overdrive problem


Measure the pressure as per manual,

Gergo

2012/10/13 Michael Salter
<michaelsalter at gmail.com<mailto:michaelsalter at gmail.com>>

> Hi Neil,
> Based upon my experience i would think that the oil type is not likely to
> be the real problem.
> You should check that the operating valve is opening all the way as per the
> workshop manual as that is very easy and can cause problems but again not
> the most likely cause.
> My bet would be that the pressure accumulator bore and piston are badly
> scored and allowing oil to pass. This can, with considerable effort be
> corrected without removing the gearbox.
> Wear and damage on other parts can contribute to the leakage but most of
> those, like the operating pistons require removal of the unit for repair.
>
> --
> Michael Salter