[Healeys] Wiring at the Fuse Block on a BJ7
eschulz at frontiernet.net
Wed Nov 28 21:59:29 MST 2012
In my reading of the wiring diagram for a BJ7, it appears that the 50 amp fuse
protects only the two horns. Am I correct? And if so, why is a 50amp fuse
needed? This seems a bit much. Also I'm considering putting a fuse in the
white wire from the key switch that goes to term A3 on the fuse block to
protect the white wire circuits. Is this a good idea?
Thanks for your help.
More information about the Healeys