[Healeys] BHP - the real figures.

Chris Dimmock austin.healey at gmail.com
Thu May 31 10:53:55 MDT 2012


I think if the oil pump isn't in the engine, it would be a pretty short, and
relatively expensive and noisy, dyno session....
;-)
Sent from my iPhone

On 01/06/2012, at 2:27 AM, Oudesluys <coudesluijs at chello.nl> wrote:

> Back in those days they gave the power at the flywheel, without
dynamo/alternator or any electrical load, I think even without water pump and
oil pump.
> On the dyno you get the power on the rear wheels, sometimes it is calculated
back to the flywheel, assuming a certain percentage of loss through the
transmission. Thus the figures are not at all comparable.
> Kees Oudesluijs
>
> Op 31-5-2012 17:37, Derek Job schreef:
>> The result.
>>
>> Maximum power is 160 bhp at 5500 revs.
>>
>> Max torque is 158 ft/lbs at 3100 revs and stays flat until 4700.
>>
>> Torque is 140ft lbs at 1700 so there is a very broad and useable power
>> band.
>>
>> I think we can safely say a stock BJ8 never produced 150 bhp!
>>
>> He told me that  whenever he tests classic cars there is always a very
>> large difference between reality and the bhp figures stated at the time.
>>
>> Derek
>> www.healeysix.net


More information about the Healeys mailing list