[Healeys] gap

[healey.nut at gmail.com]

There's no real set here because it depends on how the throttle shaft has been drilled.  Usually, however, I back off touching the lever by about one full turn (after slow idle fully set).

------Original Message------
From: Dr. C. Rubino
Sender: healeys-bounces at autox.team.net
To: healeylist
Subject: [Healeys] gap
Sent: May 26, 2012 22:54

What size should the gap be between the fast idling screw and the throttle
shaft lever?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


Sent from my BlackBerry. smartphone 
www.blackberry.com