[Healeys] Throw out bearing problems

[Jonas Payne]

Healeyman Jim just had the same problem in his,

Believe it was a problem in either the M or Sl cyl that didn't allow the full
return of the throwout arm/bearing.  May have been exacerbated by the quality
of the carbon ring

Morgan +4's use the same clutch and pressure plate.  You can get NOS carbon
rings at Morgan Spares in NY, it is possible to remove the old ring and put in
a new one that may be harder in conjunction with checking out your hydraulics


Jonas Payne
PBR
Cell:   (702) 358-5084

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of bobs1963ah at gmail.com
Sent: Thursday, June 28, 2012 7:35 AM
To: healeys at autox.team.net
Subject: [Healeys] Throw out bearing problems

I have had to replace the bearing 4 times in the last 6 years and is now gone
again. I have posted pictures at this web address. Any help or suggestions
would be appreciated.
The clutch was rebuilt at Napa at that
time.

https://picasaweb.google.com/bj7healey/HealeyTransmJun2012?feat=email#

       Thanks Bob Slater
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jpayne@thorcon.net