[Healeys] Oil Pump Recommendation for BJ8

[David Nock]

I would always install a new oil pump when doing an engine rebuild.


David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Jul 16, 2012, at 12:17 PM, Patrick Yoas wrote:

> I'm rebuilding my engine and I need a recommendation for a New Oil  
> Pump.
> I
> have two old pumps and the cylinder walls where the gears go are  
> scored.
> Pressure was good. About a third of the top of #6 piston  
> disintegrated causing
> a loud clacking sound so I have to rebuild the engine. I had the  
> gears of one
> pump CAD plated and baked to reduce the tolerances, but on the  
> advice of a
> couple of local club members it was suggested that "if it were my  
> engine I
> would get a new pump".
> Thanks,
> Patrick
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net