[Healeys] Cam and engine assembly lubes

[Oudesluys]

A good scrub with plenty of any proper solvent will do, white spirits, 
petrol, diesel, brake cleaner etc., as long as the engine has not been 
running. After that it might prove difficult to remove, but that is my 
gut feeling.
Kees Oudesluijs

Op 2-7-2012 15:05, Patrick Yoas schreef:
> **If you do get it on a cylinder wall, what would you remove it with? Auto Lacquer thinner?
> Patrick
>
> Hi Guys, I was curious about recent comments about engine assembly lubes
> with molybdenum, and found the following on the Penrite site. Don't get the
> stuff in your cylinders or use it on your rings. Read the product
> information sheet.
>
> http://www.penriteoil.com.au/products/greases/cam_assembly_lube
>
> Cheers
>
> Larry