[Healeys] Wire routing

[john spaur]

It should go through the hole that the rear main harness goes through 
(on the left hand side of the rear bulkhead) and then follow the 
harness to the rear hoop. At that point it should follow the rear 
hoop (tucked up into it) to the switch.

John

At 05:13 PM 12/22/2012 -0800, Charlie Schott wrote:
>Could someone please tell me how the wire at the back of a BT7 that 
>goes to the shut-off switch (white/black) is routed along the back 
>of the trunk. I know that the  RH rear light harness is attached 
>with clips, but what about the wire that goes to the cut-off switch. Thanks.
>
>Regards,
>
>Charlie Schott
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/schottc@knology.net 
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net