[Healeys] Fuel Pump Points

[Oudesluys]

You could do the work in situ. Don't, it is far easier to remove the 
pump and work on it on a workbench.
Kees Oudesluijs
NL


Op 22-12-2012 20:07, R. Price Lindsay schreef:
> I have an original type fuel pump on my BJ8 that I want to change the points
> on and add a transil to it (I may want to convert to negative ground in the
> near future and the pump functions fine now).  Do I have to remove the entire
> unit from the vehicle or can I just pull the electrical parts off and leave
> the body in place?
>
> Price Lindsay
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2013.0.2805 / Virusdatabase: 2637/5976 - datum van uitgifte: 12/21/12
>
>


-- 
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs at chello.nl

Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl