[Healeys] manifold nuts

[Alan Seigrist]

John -

The manifold and head are both surfaced.  Simply torque to spec - I've
never had a manifold nut com off due to vibration.  I have over 100K miles
in my BJ8 if that matters.  I have lots of old british cars, never a
problem.

Best,

Alan

On Sat, Dec 22, 2012 at 1:56 AM, john spaur <jmsdarch at sbcglobal.net> wrote:

> The parts book shows only plain steel washers and tall brass nuts to
> attach the manifolds to the head.
>
> Is a lock washer recommended?
>
> I have always used them but would like to know what the best practice is.
>
> John Spaur
> '62 BT7
> ______________________________**_________________
> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/healey.nut@**gmail.com<http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com>