[Healeys] BN4 Longbridge exhaust pipe drawing

[Jim Lesher]

You just have to remember that the shop will need 1 1/2" pipe not the current
2 1/2" Speaking from experience jim
 > From: 57healey at gmail.com
> Date: Wed, 19 Dec 2012 06:50:35 -0600
> To: bce257 at yahoo.co.nz
> CC: healeys at autox.team.net
> Subject: Re: [Healeys] BN4 Longbridge exhaust pipe drawing
>
> Thanks Andy, what are you going to use for a muffler?
>
> Patton - Plano
>
> On Dec 19, 2012, at 12:27 AM, Andrew Thorp <bce257 at yahoo.co.nz> wrote:
>
> > If anyone is restoring a Longbridge BN4 and would like an original
looking
> > exhaust, I made a drawing based on a NORS QH pipe I got off Ebay. Any
> > mandrel-bend exhaust shop should be able to accurately reproduce it from
> the
> > drawing or email me for a cad model which some of the computerised tube
> > benders can accept.
> >
> > http://tinyurl.com/bsufzhc
> >
> > Andy.
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> > Suggested annual donation  $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> >
> > Healeys at autox.team.net
> > http://autox.team.net/mailman/listinfo/healeys
> >
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/57healey@gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cleona44@hotmail.com