[Healeys] Payen 6 cylinder head gaskets

[Derek Job]

Thanks Bob, I'll check tomorrow.

Bob, Good question and I confess I don't know the answer. 11:1 isn't a
target, it would be the max and we wouldn't want more. As a comparison my
current set up has a 278 degree cam, with a fast road head and is running
about 10.5:1.

Derek


On Wed, Dec 5, 2012 at 7:36 PM, Bob Yule <autofarm at xplornet.ca> wrote:

>    Derek, we have stock.  They came from our suppliers AHead4Healeys, you
> might want to give them a try in Rugby.
> Cheers.......Bob
> Check out our web site www.autofarm.net
> ----- Original Message ----- From: "Derek Job" <derek.c.job at gmail.com>
> To: "Forum" <Healeys at autox.team.net>
> Sent: Wednesday, December 05, 2012 1:27 PM
> Subject: [Healeys] Payen 6 cylinder head gaskets
>
>
>  Anyone know where you can source these, NOS?.
>>
>> I understand that the gaskets currently sold by the usual suppliers are
>> not
>> as good and not up to the job for performance applications. I'll be
>> running
>> 11:1 compression and a race head.
>>
>> The alternative is Dennis Welch competition gaskets at 225 pounds each
>> plus
>> VAT!!!!
>>
>> Surely there must be a decent alternative out there somewhere? Any
>> recommendations?
>>
>> regards
>>
>> Derek
>> ______________________________**_________________
>> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/**
>> options/healeys/autofarm at cyg.**net<http://autox.team.net/mailman/options/healeys/autofarm@cyg.net>