[Healeys] Moss Motors adjustable camber bushing set

[John Sims]

Did anyone call Moss about this to speak with their technical people?

John Sims, BN6
Aberdeen, NJ

www.healey6.com

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of warthodson at aol.com
Sent: Tuesday, December 04, 2012 2:44 PM
To: healeys at autox.team.net
Subject: [Healeys] Moss Motors adjustable camber bushing set

Recently I helped a friend install a set of Moss Motors adjustable camber
bushings in his '63 BJ7. He wanted to reduce the amount of positive camber.
After reading the Moss instruction sheet several times, it appears that
their illustrations at the bottom of page 1 are backwards.
http://www.mossmotors.com/graphics/products/instructions/282-308.pdf
The position of the fulcrum pin never changes, it's position is controlled
by the upper "A" arms attached to the shock. Therefore, if the bushing is
orientated as shown in the left illustration, the trunion & top of the
kingpin will be moved farther away from the engine which would be more
positive camber not less camber. Am I correct or am I missing something?
Gary Hodson
_______________________________________________