[Healeys] bracket-front mounting support

[john spaur]

Resending to the list without the drawing attachment.

>Date: Sun, 26 Aug 2012 10:41:22 -0700
>To: Michael J Maloney <mikljmal at gmail.com>
>From: john spaur <jmsdarch at sbcglobal.net>
>Subject: Fwd: Re: [Healeys] Fender bolts
>Cc: Healey List <Healeys at autox.team.net>
>
>Mike,
>
>This drawing is patterned after the plates on my '62 BT7. There are 
>not any right angles; it is as if the body builder picked up a piece 
>of scrape sheet metal and fashioned the plates. The 1/2" holes are 
>slightly elongated; most likely from prior damage. Be sure to check 
>the hole locations against those on your car. The left side has two 
>3/16" attachment holes in the shroud and the right side only one. How odd.
>
>Thanks for the info about the rear shroud plate.
>
>Cheers,
>John