[Healeys] 4 stud axle

[Oudesluys]

The brake drums might be from a BN2 or BN4. Cape International has this 
partnumber on their list but with an A or X instead of the C.
Kees Oudesluijs
NL


Op 24-8-2012 2:04, Peter & Veronica schreef:
> Gbday all
>
> Ibm looking at a 4 stud axle to put in my latest project. On cleaning it up
> I found the diff centre flange is marked 9/33, which equates to a 3.66:1
> ratio. What would this be from? Also the drums that came with the axle,
> although looking superficially correct, do not in fact fit as the holes are
> about 1/4b
 further apart than the studs in the hub. They are MOWOG parts,
> marked 1B4483C. Any thoughts?
>
> Cheers
>
> Peter Linn
> Brisbane Oz
> BN1 Ward Special coupe
> BN1 Holden V6
> Ausca/Healey/Alfa
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.2197 / Virusdatabase: 2437/5219 - datum van uitgifte: 08/23/12
>
>


-- 
Kees Oudesluijs
Dorpsstraat 183
2995XG Heerjansdam
T: 078-677 1233
E: coudesluijs at chello.nl

Technische commissie Jensen Healey en GT
Het Jensen Genootschap Holland
www.jensenholland.nl