[Healeys] Thanks for pushrod advise

[Chris Masucci]

Cometic.  Send an original in case they dont't have a print on file, and tell
them how thick you want it.

Chris
Sent from my iPhone

On Aug 11, 2012, at 10:04 PM, Jonathan Quandt <jfaquandt at comcast.net> wrote:

> Hello, where would one purchase oversized head gaskets for a 100-4. Thanks
Q
> On Aug 11, 2012, at 7:50 PM, WILLIAM B LAWRENCE wrote:
>
>> For that matter you can buy a solid copper head gasket in a greater
thickness.
>> It might be less likely to burn through.
>>
>> Google gasket works.
>>
>> Bill Lawrence
>>
>>> Date: Fri, 10 Aug 2012 14:43:47 -0700
>>> From: eyera3000 at gmail.com
>>> To: healeyguy at aol.com
>>> CC: healeys at autox.team.net
>>> Subject: Re: [Healeys] Thanks for pushrod advise
>>>
>>> Will double head gaskets work?  Used to do that on small block
chevy,s.....
>>>
>>> Ira Erbs
>>> IT Consultant
>>> Portland, OR
>>> On Aug 10, 2012 1:25 PM, <healeyguy at aol.com> wrote:
>>>
>>>> Jonathan
>>>> The new aluminum head may or may not cure the short pushrod issue.
>> Depends
>>>> on
>>>> which part the excess metal was removed, head or block.
>>>> Aloha
>>>> Perry
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Jonathan Quandt <jfaquandt at comcast.net>
>>>> Sent: Fri, Aug 10, 2012 3:41 pm
>>>>
>>>>
>>>> I suppose a new aluminum head is in order but at what cost. Regards,
>>>> Jonathan