[Healeys] Oil plug washer

[MBran89793 at aol.com]

Hi Bob-
FYI
Just confirmed that 3/4" is correct. 
(Measured drain plug and washer.)
Marion Brantley 
 
 
In a message dated 4/27/2012 2:13:59 P.M. Eastern Daylight Time,  
bspidell at comcast.net writes:

I think  it's 3/4" ID (hopefully, someone can un/confirm). 

Or, you can just  anneal the one you have: heat it to 'cherry red' with a 
propane torch and let  cool. Will seal as good as new. 


Bob  


-------------------------------- 
Bob Spidell - San Jose, CA  

----- Original Message -----


Can someone give me the  dimensions for the copper washer used to seal the 
oil 
drain plug on BN7? I  need a new one and don't have time to order from 
Moss. 
I assume I can get  one of the proper size locally. 

Thanks, 

Ron Fine  
Suggested annual donation   $12.75
Archive: http://www.team.net/archive
Forums:  http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:  
http://autox.team.net/mailman/options/healeys/mbran89793@aol.com