[Healeys] fitting piston/caliper seals

[john spaur]

I fit them to the bottom of piston then fit them to the caliper and 
push the piston into the bore if I recall correctly.

John

At 06:06 PM 4/26/2012 +0100, Simon Lachlan wrote:
>Hi,
>
>Can someone kindly remind me of the proper/easiest way to fit the seals into
>my MkII BT7's callipers? I'm referring to the rubber boot things that go
>into the outer groove within the bore and the groove around the top of the
>piston.
>
>Likewise, don't I recall that the inner seal was slightly tapered? My new
>ones are square in cross section.
>
>Simon
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net