[Healeys] Light Circuits

[Kent McLean]

Jack Feldman wrote:
> You only need one relay for both high and low beams.

I think a better solution is multiple relays.  If that single relay
fails, you are suddenly in the dark. The overkill solution is 4
relays -- 1 for each high and low beam. Plan B would be 3 relays,
1 for the high beams, and 1 for each low beam; if the high beam
relay dies, you still have the lows. If a low beam relay dies,
you still have the other low beam.

Here's a simplified diagram using 1 relay for the low beams, 1 relay
for the high beams:

<http://www.humanspeakers.com/audi/headlight-simple.htm>

-- 
Kent McLean
'56 100 BN2