[Healeys] Sidescreen fixing wing nuts

[Rich Chrysler]

Hello Per,

The Longbridge 100 Six used a single eared chromed wing nut at the rear
anchor fixing, and yes, it was 3/8" NF, not 5/16" as in later roadsters.
The fixing nut fitted to the forward iron was a 4 eared "star" sort of shape
that was 5/16" NF thread.

Rich 

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Per Schoerner
Sent: 2012-04-02 6:46
To: healeys at autox.team.net
Subject: [Healeys] Sidescreen fixing wing nuts

Hi
Helping a friend with his BN4, it's one of those fairly early ones built in
Longbridge. As far as I understand it should have the one eared wing nut to
fix the sidescreen to the door. It seems that the size of the stud on the
rear fixing plate is 3/8 UNF, whereas it is 5/16 UNF on my 3000. Is this
correct? Also, should the front nut also be of the one eared type.

Best regards, Per in Sweden
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net

[demime 1.01d removed an attachment of type image/jpeg which had a name of qtrpanel.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 6 Detail0012.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of conclave10 034.jpg]