[Healeys] Valve guides

[Michael Salter]

Hi John,
Before you make the decision please read my blog post on the subject
http://www.netbug.net/blogmichael/?s=bronze+valve+guides

Michael Salter


On Tue, Oct 18, 2011 at 7:12 PM, john spaur <jmsdarch at sbcglobal.net> wrote:

> I checked the archives and there was a post saying not to use bronze valve
> guides in a cast iron head. My engine is basically stock.
>
> I noticed two there are two different valve guides; one is cast iron (stock
> I presume) and the other is manganese-bronze.
>
> What material should I use for the valve guides.
>
> What is a good source to purchase them from?
>
> Thank you,
> John Spaur
> '62 BT7
> ______________________________**_________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/msalter@**precisionsportscar.com<http://autox.team.net/mailman/options/healeys/msalter@precisionsportscar.com>