[Healeys] compression electrical

[Oudesluys]

Best to connect the solenoid in the car to the startermotor and engine 
to the chassis (earth) with jumper cables, however make sure the 
connections are solid and cannot fall off. Also make sure the engine is 
supported properly and cannot fall over.
Kees Oudesluijs
NL

Op 14-10-2011 6:50, john spaur schreef:
> So... I need to do a compression test.
> The engine is out of the healey sitting on a dolly. I plan on running 
> jumper cables from another car to get the juice to turn the engine 
> over. How should I switch the power on and off. I need a momentary 
> switch. Can I take the solenoid out of the healey and use it? Are 
> there any issues that I should look out for? Does anyone have another 
> idea?
>
> Thank you,
> John Spaur
> San Jose, CA
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1831 / Virusdatabase: 2090/4549 - datum van uitgifte: 
> 10/13/11