[Healeys] Transmission bump clearance

Chris Masucci csooch1 at aol.com
Wed Oct 12 13:24:41 MDT 2011


My opinion is to shim as needed to achieve the proper driveshaft to opinion
angle.

Cheers,
Chris
BJ8

Sent from my iPhone

On Oct 12, 2011, at 11:50 AM, john spaur <jmsdarch at sbcglobal.net> wrote:

> There is a rubber bump between the transmission mounts. The parts book shows
a shim "as needed". Should the bump be shimmed to sit against the frame or
should a little clearance be left. It appears that there will be less than
1/8" between the bump and frame if I leave it un-shimmed.
>
> Thank you,
> John
> 62 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/csooch1@aol.com


More information about the Healeys mailing list