[Healeys] Vibration Dampener Nut Removal Socket.

[Patrick and Caroline Quinn]

G'day Bob

It just so happens that I know that.

It's a 1 inch Whitworth socket that will have a 3/4 inch drive. It is the
same for all C-series six-cylinder engines. I had the engine of the BN3/1
upside down on the 4-legged engine stand with a block of wood in the
crankcase, the socket, a bar and a long piece of galvanised pipe.

One huge pull and it was loose and yes there was a large dent in the wood.

Hoo Roo

Patrick Quinn
Sydney, Australia

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of rd_parker at juno.com
Sent: Friday, 7 October 2011 2:52 PM
To: Healeys at autox.team.net
Subject: [Healeys] Vibration Dampener Nut Removal Socket.

Listers,

Does anyone know the size of the vibration dampener nut removal socket
for a 3000 engine; either in inches or millimeters?
Thanks,
Bob in Bellflower, Ca.
____________________________________________________________
Refinance for 2.625%/3.10% APR
Loans under 729K usually qualify for US GOV backed refinance programs
http://thirdpartyoffers.juno.com/TGL3141/4e8e77ce1548d864280st06vuc
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/p_cquinn@tpg.com.au