[Healeys] Healeys Digest, Vol 5, Issue 696

[Oudesluys]

Just accross the two terminals. Disconnect all wires to the coil first.
Kees Oudesluijs


Op 5-10-2011 14:53, Patrick Yoas schreef:
>
> How do you measure the ohms? Where do you connect the meter test leads to?
> Patrick
>
> Date: Wed, 5 Oct 2011 09:29:01 +0200
> From: "Thomas Willig"<twillig at ruda.de>
> To:<healeys at autox.team.net>
> Subject: Re: [Healeys] Healeys Digest, Vol 5, Issue 696
> Message-ID:<4E9D161D2AF9984C94D841B0A0D5A1160E1645 at dw01.ruda.local>
> Content-Type: text/plain; charset="us-ascii"
>
> Simon,
>
> 123 specifies that the coil should not have a resistance under 1 Ohm.
> They recommend a resistance of 3 Ohms for a four cylinder engine up to
> 6000 rpm and 1,5 Ohm for all six cylinder engines and four cylinders
> that rev up to 6500 rpm.
>
>
> Regards
>
>
> Thomas Willig
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1809 / Virusdatabase: 2085/4538 - datum van uitgifte: 10/04/11