[Healeys] Clutch conversion

[PG]

Don't know about the clutch question but, I installed the Denis Welch ball
throw-out and it's great......easier, less vibration, quieter....great.


Paul

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of john spaur
Sent: Tuesday, October 04, 2011 2:47 PM
To: healeys at autox.team.net
Subject: [Healeys] Clutch conversion

I have a MKII 3000 with a 10" clutch and carbon release bearing.

I understand that the later clutches are 9-1/2.

I am wondering if it is worthwhile to switch to a 9-1/2" diaphragm 
(many fingers) clutch in order to use the Denis Welch ball style 
release bearing.

I believe I need to change to a later style flywheel too although I 
have been told that it just needs to be changed to a three dowel 
arrangement instead of the two dowel. Is this true?

I am just building a nice driver.

Thank you,
John
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/britishcars@shaw.ca