[Healeys] BN1 Radiator cap

[warthodson at aol.com]

If your radiator is original you will need a long reach cap. I am not sure
what the original cap rating was on a 100, but I would think something around
7 Lbs. would be appropriate.
Gary Hodson



-----Original Message-----
From: STEPHEN CUSS <stephen.j.cuss at btinternet.com>
To: healeys <healeys at autox.team.net>
Sent: Mon, Nov 28, 2011 9:12 am
Subject: [Healeys] BN1 Radiator cap


Hi,

an someone help me find out what model of radiator cap should fit a
tandard 100/4 radiator. The cap I have doeas not seem to push the spring down
s you would normally expect, Should the cap be long reach? Also what is the
ressure in Lbs before the spring gives as I know not all caps are the same.

hanks in advance for any help with this matter.
______________________________________________
ealeys at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com