[Healeys] Ruff running, bucking car -- fresh paint

[Mark J Bradakis]

Greg Mandas wrote:
> Something in this thread makes me wonder about grounding on a fresh rebuild,
> meaning a freshly painted car.
>
> When rewiring the grounds after a complete repaint, do you need to grind away
> the paint when attaching grounds?
>

It depends.  If the ground is made through a threaded fastener you
just need to make sure you are getting metal to metal contact on the
threads.  It may require chasing the threads with a tap to get a clean
surface.  If you have a male tab and a female connector going over it,
you should scrape away some of the paint to get a good ground.  A bit
of dielectric grease on the connection will help retard the rust.

mjb.