[Healeys] Gunson Colortune

[Freese, Ken]

I tried a single wire and the readings are too erratic. It isn't hot enough. I
now have a three wire but not yet installed.
Ken Freese

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Steve B. Gerow
Sent: Thursday, November 17, 2011 6:00 AM
To: healeys at autox.team.net
Subject: Re: [Healeys] Gunson Colortune

I went to an air-fuel meter, the K&N:

http://tinyurl.com/76t9dlb

I mounted two O2 sensors on the downpipes with a dash switch between the two.

I agree this is the best way to go because you can watch each carb's mixture
while driving.

Note - you don't have to buy their O2 sensors - any single wire sensor will
do.


--
Steve Gerow
Altadena, CA
BN6
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ken.freese@aerojet.com