[Healeys] Sticky sideshift gearbox

[Per Schoerner]

Hi
I'll step in with a thought too. If the clutch and flywheel have been 
changed to the BJ8 type, the release bearing also have to be changed to 
one that is a little thicker.

Per in Sweden

Alan Seigrist skrev 2011-11-01 10:34:
> Peter / Chris -
>
> Oh right, good thought.  Also if someone put a BJ8 brake master in for the
> BT7 clutch master (easy mistake to make, they can look identical on the
> outside) you will have this same problem.
>
> Alan