[Healeys] Can't get the Healey startedþ

[Bob Spidell]

Connect positive terminal on the 'donor' car/battery to positive battery terminal or chassis--preferably chassis--on Healey.

Connect negative battery terminal--or chassis, preferably--on donor to negative terminal on Healey battery.

Make the last connection--on either--to the nominal ground (i.e. positive lead to chassis on Healey or negative lead to 
chassis on donor).

Turn key on and hit the starter.

Bob

On 5/13/2011 8:11 PM, Elton Schulz wrote:
> What is the correct hookup procedure for jump starting a positively ground car?
> Thanks,
> Elton
> ----- Original Message ----- From: "Leonard Berkowitz" <drberkowitz at hotmail.com>
> To: <healeys at autox.team.net>
> Sent: Friday, May 13, 2011 10:21 AM
> Subject: Re: [Healeys] Can't get the Healey started~
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************