[Healeys] insulation products

[Tadeusz Malkiewicz]

David,

 

I run into the same problem. Silicone is a pain to glue on. After numerous
experiments I prime the Koolmat layer with a glue called PATTEX Extreme and
then on top use contact glue.. 

 

My upholstery shop gave me another solution - to sand it with very heavy
sand paper.

 

Tadek

 

  _____  

From: David Nock [mailto:healeydoc at sbcglobal.net] 
Sent: Thursday, March 31, 2011 5:08 PM
To: Tadeusz Malkiewicz
Cc: healeys at autox.team.net
Subject: Re: [Healeys] insulation products

 

We have installed both, and they both seem to work as well as each other.
The problem we have had with the Koolmat is that nothing will stick to it.
What you are going to use as carpet insulation you will have to get some
good glue to install it. If you use the Dynatmat  material you can use their
Dynaliner which has a peel a stick backing and sticks right in place.

 

 

 

 

David Nock

British Car Specialists

Stockton Ca 95205

209-948-8767

 

www.britishcarspecialists.com

.

.

 

On Mar 30, 2011, at 4:59 PM, Tadeusz Malkiewicz wrote:





I did some research about 1.5 years ago and I went with Kolmat. It's

silicone based. Photos are at

https://picasaweb.google.com/Volvo1800S/AssemblyPhase2#
<https://picasaweb.google.com/Volvo1800S/AssemblyPhase2> 

 

I read about it on few other lists and I think I was finally convinced by

someone doing an e-type with it. I also saw it installed in my friend's

e-type and I have to say heat is not a problem there, despite a V12..

 

I also use felt though.

 

Tadek

_______________________________________________

Healeys at autox.team.net

Donate: http://www.team.net/donate.html

Suggested annual donation  $12.75

Archive: http://www.team.net/archive

Forums: http://www.team.net/forums

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net