[Healeys] windshield and steering-wheel removal

[Rich C]

Chris, unclip and remove the padded dash top by removing the dash mirror,
and the two black steel clips that are bent and wrapped under the leading
edge, left and right sides. It will then lift up to clear the demister vent
pegs from their holes and the entire pad will lift up and back. That will
expose the hex head bolt that will need to be unscrewed to release the
middle anchor bracket from the cowl.

With the complete trafficator assembly already removed, pop the little C
clip from its groove at the end of the splined portion of the steering tube.
Unscrew the locking collar holding the adjustable splines from the column
and pull the steering wheel back and off.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of chris george
Sent: Monday, March 28, 2011 11:10 PM
To: Healeys at autox.team.net
Subject: [Healeys] windshield and steering-wheel removal

i am trying to remove the windshield on a 67 bj8. there is a clip on  
the bottom in the middle that can be seen through the windshield.  it  
seems to be connected under the dash.  do i need to remove this to  
remove the windshield and how do i access it.
  i am trying to remove the steering wheel from the same car.  it  
seems to be an adjustable steering wheel? there is a knurled nut it  
wont  move  i removed  the trafficator assembly any advice.
thanks
chris
bostina at mac.com
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net