[Healeys] Fw: Blower fresh air hose

[Dick Matson]

The Nocks at BCS had a ring/screen assy like used on the front of the fresh
air duct.  I installed it on the heater fresh air side.

Dick Matson / Bj8
----- Original Message -----
From: gonnagitcha90 at hotmail.com<mailto:gonnagitcha90 at hotmail.com>
To: john spaur<mailto:jmsdarch at sbcglobal.net> ;
healeys-bounces at autox.team.net<mailto:healeys-bounces at autox.team.net> ;
healeys at autox.team.net<mailto:healeys at autox.team.net>
Sent: Saturday, March 05, 2011 8:02 AM
Subject: Re: [Healeys] Blower fresh air hose


I just used a large wire tie to the frame as mine got too close to the
generator.
Richard of KY
BN7 #440
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: john spaur <jmsdarch at sbcglobal.net<mailto:jmsdarch at sbcglobal.net>>
Sender: healeys-bounces at autox.team.net<mailto:healeys-bounces at autox.team.net>
Date: Fri, 04 Mar 2011 19:02:10
To: <healeys at autox.team.net<mailto:healeys at autox.team.net>>
Subject: [Healeys] Blower fresh air hose

The blower motor fresh air hose is not attached to the cowl/cross
brace assembly and is just poked through the hole from what I have seen.

Are people attaching the hose to the hole at the cowl? If so what is
suggested to attach it? Is there something that I have not seen or
that I am missing?

Thank you,
John Spaur
'62 BT7
________________________________________