[Healeys] heater water valve

[David Nock]

Do not cut the pipe. The aluminium adaptor is attached to the top of  
the heater box with a star clip that has probalby slipped.




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Jun 6, 2011, at 10:24 PM, I Erbs wrote:

> I bought what was sold as a NOS valve for my BT7 heater. It does  
> not seat
> against the o ring and base.
> It bottoms out on the tube. I am figuring to cut down the pipe, but  
> want to
> find out if I'm missing something?
> It stops about 1/8" short. I used a dead blow hammer but the  
> internal valve
> hits the pipe.
> Thanks
>
> -- 
> Ira Erbs
> IT CONSULTANT
> Portland, OR
>
>  We can't solve problems by using the same kind of
> thinking we used when we created them.
>                                            -Albert Einstein
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net