[Healeys] Incompatibility Pertonix and Tach conversion

[Alan Seigrist]

Tom -

If Nisonger converted your tach to negative ground, you shouldn't have
any problems.  Nisonger would have likely adjusted the tach for
Pertronix already.

Alan


On 7/29/11, Thomas J. Morrione <tjmorrio at colby.edu> wrote:
> Kees,
>
> I'd appreciate it if you would  elaborate a bit on the ballast/wiring
> problems you noted when the Pertronix ignition was combined with the
> electronic tach conversion. I guess I'm headed for trouble in that I have
> (yet to install) a newly bought (last 6 months) for my 64 BJ8 Pertronix
> Flamethrower negative ground distributor and flamethrower coil (Moss 40511 3
> ohm) and just received back from Nisonger  my cleaned up tach converted to
> electronic neg ground.
>
> Thanks in advance,
> Tom
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device