[Healeys] brake caliper o-rings

[Alan Seigrist]

As always, start with Davod Nock at British Car Specialists in
California.  Bob Yule at Autofarm probably has them also.  Ed might
have them too.

On 1/28/11, Robert Bender <rbender9 at sbcglobal.net> wrote:
> I'm looking for a source for the small o-rings that go between the halves of
> my BJ7 front calipers (Girling 14).  Should be about 0.500" OD x 0.300" ID x
> 0.050" thick, with a square cross section.  Any suggestions?
> Thanks,
> Bob
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device