[Healeys] Front suspension question

[john spaur]

Make some long all-thread rods, you will need two to lower and 
tighten the lower spring plate. Be sure to use all-thread that is the 
same diameter as the bolts because if the plate is skewed at all it 
will be extremely difficult to get all four bolts to align.

John

At 10:28 AM 8/27/2011 -0700, you wrote:
>Hi,
>My front end feels wobbly on the road, there is noticeable movement in the
>lower swivel pin bush both sides. So it seems like I should go for new bushes.
>
>Is it wise to disaassemble the suspension with the floor jack method?
>
>Do the bushes need to be reamed?
>
>Everything, else feels okay; what should I be looking at, or replace as a
>matter of course, while it's apart?
>
>Thanks, Alan
>
>'58 100 6
>_______________________________________________
>Healeys at autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation  $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net
>
>__________ Information from ESET Smart Security, version of virus 
>signature database 6415 (20110827) __________
>
>The message was checked by ESET Smart Security.
>
>http://www.eset.com