[Healeys] 100/6 rod bolts

[Frank]

I happen to have a 3000 engine (29K) and I think I can use the rod bolts from
that.  I had planned to rebuild the 3000 engine but it had been left outdoors
after it had been "rebuilt" by a ham fisted character.

I checked my Moss catalog and the BJ8 bolts are $21 each times twelve.

Upon inspection of the 100/6 rods I can see that each rod and cap is stamped
with the cylinder number.  Was this done at the factory or is this evidence
the engine has been apart?

Frank