[Healeys] Bodywork question

[David Nock]

Bob, on the original fender you will need to open up the crimped edge  
and remove the piece that attaches the fender to the hinge pillar.  
Then you can insert into the new section and pinch in place.

The other option is I have the fender attachment plate that pinches  
in the fender and attaches to the hinge pillar for the 6 cylinder  
cars and could be modified for the 4 cylinder cars.




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Aug 22, 2011, at 8:41 PM, Bob Spidell wrote:

> The left front wing of our BN2 is pretty bunged-up.  I got a repair  
> panel from Kilmartin, which is overall pretty high quality.   
> Problem is, the original has a (relatively) heavy flange about an  
> inch in from the rear of the wing--for fitting to the front shut  
> pillar--and the repair panel only has a 90deg bend at the very  
> rear.  Anyone fitted up these repair panels?  All help, advice,  
> sympathy, etc. accepted.
>
> TIA,
> Bob
>
> -- 
> *******************************************************************
> Bob Spidell           San Jose, CA            bspidell at comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net