[Healeys] Front A-Arm bracket location

[David Nock]

Back of the book section  R




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Aug 11, 2011, at 1:15 PM, Michael MacLean wrote:

> David,
>      The only factory service manual for 6 cylinder cars I have is  
> an original 100/6 blue binder factory service manual.  I don't seem  
> to find any frame dimensions in it at all.
> Mike
>
> --- On Thu, 8/11/11, David Nock <healeydoc at sbcglobal.net> wrote:
>
> From: David Nock <healeydoc at sbcglobal.net>
> Subject: Re: [Healeys] Front A-Arm bracket location
> To: "Michael MacLean" <rrengineer.mike at att.net>
> Cc: healeys at autox.team.net, "'Bob Spidell'" <bspidell at comcast.net>,  
> "Rich Chrysler" <richchrysler at quickclic.net>
> Date: Thursday, August 11, 2011, 4:08 PM
>
> The location of the Lower A arm brackets is in the Factory service  
> manual for the 6 cylinder cars.
>
>
>
>
> David Nock
> British Car Specialists
> Stockton Ca 95205
> 209-948-8767
>
> www.britishcarspecialists.com
> .
> .
>
> On Aug 11, 2011, at 8:29 AM, Michael MacLean wrote:
>
>> Rich,
>>      I argued this with the body guy yesterday.  He is going by  
>> another 100 in
>> the shop that has the two brackets in slightly different  
>> locations.  You and I
>> know they are supposed to be symmetrical, but I have to convince  
>> this guy.
>> Today I am bringing the lower a-arms that have not been  
>> disassembled or
>> rebuilt yet and fit them up to the car to show him how one side  
>> fits and the
>> other does not.  I'll report back to the list.
>> Mike
>>
>> --- On Thu, 8/11/11, Rich Chrysler <richchrysler at quickclic.net>  
>> wrote:
>>
>>
>> Also, can you not get dimensions from the other side?
>>
>> Rich
>>
>> -----Original Message-----
>>
>>
>>
>> The problem is that he has already welded it in the wrong  
>> location.  I am
>> going there tomorrow or Friday and taking the lower a-arm assembly  
>> to use to
>> show him.  I just wanted a measurement to back this up.  A few  
>> years ago I
>> bought a frame dimension diagram for the BN1/2 from BCS, but I  
>> can't seem to
>> find it anywhere.  Anyone know what book this measurement may be in?
>> Mike MacLean
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
>> healeydoc at sbcglobal.net