[Healeys] BN1 Hood configuration

[Rich Chrysler]

Stephen et al,

The 3rd series of hood bows on the Hundred that featured the elongated
obtuse angle slotted mounting arm for better stowage when folded, also
featured a pair of small holes per each side on the rear most hood iron that
accepted a pair of screws that entered from inside the car, piercing to
anchor the  webbing straps.

Please note that the 3 mounting holes per side of the car did not change
position throughout the production of the Hundred. 

Listers, this is also being forwarded to John Sims for posting.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of STEPHEN CUSS
Sent: 2011-08-04 12:51
To: healeys at autox.team.net
Subject: [Healeys] BN1 Hood configuration

Hi everyone, just putting finishing touches to re-build, but am not clear
how
hood frame should work as mine appears bent in several places has anyone got
some good photos of hood in both down and up positions. I need this as I
need
to mount my seat belts and do not want to find I have put the mounts in the
wrong place. Thanks for all the help with this matter. Stephen
_______________________________________________

[demime 1.01d removed an attachment of type image/jpeg which had a name of Scan49.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Scan46.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Interior 0010.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of work pics 2 011.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 100 Details 0039.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of PC170035.JPG]